Heat-Pressing Guide

DTF Pressing Instructions

Follow These Steps for an Efficient DTF Pressing Process

You’ll achieve beautiful, durable designs on your fabrics.

Cotton Fabrics

Set your heat press to 260°F (127°C). This is perfect for cotton. It helps the DTF transfer stick without burning. The ink bonds well, making the design bright and durable. Use instant or hot peel.

Polyester Fabrics

Set your heat press to 230-260°F (110-121°C). Polyester needs lower heat because it can melt or get damaged easily. This temperature keeps the fabric safe and helps the DTF transfer stick well. Use instant or hot peel.

Required Time

Place the DTF film on the fabric and press with medium to hard pressure for 15 seconds. Then, for better adhesion and durability, do a second press at 300°F (149°C) for 5 seconds using a Teflon sheet.

Troubleshooting

Before you begin, check that your heat press is calibrated. This ensures it's set to the right temperature and pressure for a good transfer. Use a temperature gun to verify the actual heat matches the display. If there's a difference, adjust it accordingly.